Advanced Ceramics Manufacturing

Head: PD Dr.-Ing. habil. Tobias Fey

Science movies
Microcomputertomography gives an insight view to materials microstructure. Using modern 3D-rendering technique and common anaglyph method you can find several 3D-movies (red/green and cyan/red) of ceramic and ceramic related microstructures.

Software Tools (Open Source)
Here you find several useful tools with focus on material science.

Current fields of research and interests

Periodic and non periodic cellular ceramics and composites using additive manufacturing and conventional processing
Microstructure characterisation (esp. Microtomography) and testing (mechanical and thermal properties)
Simulation and modeling on µCT-derived microstructure models

Videos

Latest talks on porous ceramics can be found:

Publications
Current Publications (from CRIS Database, unfortuantly due to technical reasons not complete). Complete Liste can be downloaded here.

2025

Funk S., Wolf E., Weichelt M., Martin A., Kakimoto Ki., Fey T.:
Keep it simple: Fast processing of periodic BCZT structures by combination of VPP and replica technique
In: Open Ceramics 22 (2025), Article No.: 100761
ISSN: 2666-5395
DOI: 10.1016/j.oceram.2025.100761
Hoffmann P., Wahl L., Funk S., Fey T.:
From timeless Japanese wood joinery to advanced ceramic joint interlocking
In: Discover Materials 5 (2025), Article No.: 74
ISSN: 2730-7727
DOI: 10.1007/s43939-025-00250-6
Osterloh J., Heltmann-Meyer S., Trossmann VT., Cai A., Kulicke Y., Terörde K., Sörgel C., Lang I., Wajant H., Scheibel T., Fey T., Steiner D., Arkudas A., Horch RE.:
In Vivo Vascularization of Cell-Supplemented Spider Silk-Based Hydrogels in the Arteriovenous Loop Model
In: Biomimetics 10 (2025), Article No.: 117
ISSN: 2313-7673
DOI: 10.3390/biomimetics10020117
Romero AS., Innocentini MD., Vladimir Oliveira J., Lider A., Fey T., Travitzky N., Hotza D.:
Unveiling the potential of silicon carbide as a support material and membranes for oily wastewater remediation
In: Separation and Purification Technology 354 (2025), Article No.: 129044
ISSN: 1383-5866
DOI: 10.1016/j.seppur.2024.129044

2024

Eckstein U., Kuhfuß M., Fey T., Webber KG.:
Feasibility of Powder-Based High-Throughput Synthesis for Ceramics Development: Case Study on the Influence of Calcination Temperature in BiFeO3-BaTiO3
In: Advanced Engineering Materials (2024)
ISSN: 1438-1656
DOI: 10.1002/adem.202302126
Fey T., Hoffmann P., Roland S., Galic S.:
Use of Plant-Based Pore-Forming Agents in Ceramic Materials
In: Cfi-Ceramic Forum International 101 (2024), p. E62-E68
ISSN: 0173-9913
Hoffmann P., Simon S., Zierath B., Fey T.:
Advanced Hierarchical Biomorphous Silicon Carbide Monoliths
In: Advanced Engineering Materials (2024)
ISSN: 1438-1656
DOI: 10.1002/adem.202302227
Marques LS., Weichelt M., Kuhfuß M., Rambo CR., Fey T.:
Novel Sol-Gel Synthesis Route for Ce- and V-Doped Ba0.85Ca0.15Ti0.9Zr0.1O3 Piezoceramics
In: Materials 17 (2024), Article No.: 3228
ISSN: 1996-1944
DOI: 10.3390/ma17133228
Martin A., Kato N., Fey T., Webber KG., Kakimoto KI.:
Increased thermal stability by the addition of ZrO2 into a 0.48Ba(Zr0.2Ti0.8)O3-0.52(Ba0.7Ca0.3)TiO3 matrix material
In: Japanese Journal of Applied Physics 63 (2024), Article No.: 09SP02
ISSN: 0021-4922
DOI: 10.35848/1347-4065/ad6c58
Simon S., Hoffmann P., Stötzel T., Weber J., Fey T.:
Keep it Simple: Ceramic Kelvin Cells via Liquid Crystal Display-Stereolithography Printing
In: Advanced Engineering Materials (2024)
ISSN: 1438-1656
DOI: 10.1002/adem.202302228
Stankiewicz G., Dev C., Weichelt M., Fey T., Steinmann P.:
Towards advanced piezoelectric metamaterial design via combined topology and shape optimization
In: Structural and Multidisciplinary Optimization 67 (2024), Article No.: 26
ISSN: 1615-147X
DOI: 10.1007/s00158-024-03742-w
Stötzel T., Funk S., Fey T.:
The sound of porosity: Suitability of the impulse excitation technique (IET) to determine the Young's modulus of 2D macroporous ceramics
In: Open Ceramics 20 (2024), Article No.: 100686
ISSN: 2666-5395
DOI: 10.1016/j.oceram.2024.100686
Webber KG., Clemens O., Buscaglia V., Malič B., Bordia RK., Fey T., Eckstein U.:
Review of the opportunities and limitations for powder-based high-throughput solid-state processing of advanced functional ceramics
In: Journal of the European Ceramic Society 44 (2024), Article No.: 116780
ISSN: 0955-2219
DOI: 10.1016/j.jeurceramsoc.2024.116780
Xu Z., Arkudas A., Munawar M., Schubert DW., Fey T., Weisbach V., Mengen L., Horch RE., Cai A.:
Schwann Cells Do Not Promote Myogenic Differentiation in the EPI Loop Model
In: Tissue Engineering - Part A 30 (2024), p. 244-256
ISSN: 1937-335X
DOI: 10.1089/ten.tea.2023.0215

2023

Avramovska M., Freude D., Schwieger W., Fey T., Kärger J., Haase J.:
NMR Studies of the Rehydroxylation of Ceramic Materials with Respect to Rehydroxylation Dating
In: Journal of Physical Chemistry C (2023)
ISSN: 1932-7447
DOI: 10.1021/acs.jpcc.3c05189
Hoffmann P., Köllner D., Simon S., Kakimoto Ki., Fey T.:
Modular lead-free piezoceramic/polymer composites with locally adjustable piezoelectric properties
In: Open Ceramics 13 (2023), Article No.: 100320
ISSN: 2666-5395
DOI: 10.1016/j.oceram.2022.100320
Köllner D., Niedermeyer S., Vermes M., Simon S., Kakimoto KI., Fey T.:
Energy-Reduced Fabrication of Light-Frame Ceramic Honeycombs by Replication of Additive Manufactured Templates
In: Materials 16 (2023), Article No.: 4924
ISSN: 1996-1944
DOI: 10.3390/ma16144924
Nawaz Q., Fiedler T., Biggemann J., Fey T., Boccaccini AR.:
Flexural strength of biopolymer coated bioactive glass (45S5) sintered struts for bone tissue engineering applications
In: Materials Letters 337 (2023), Article No.: 133957
ISSN: 0167-577X
DOI: 10.1016/j.matlet.2023.133957
Simon S., Köllner D., Hoffmann P., Keck E., Spath I., Meyse M., Fey T.:
Influence of ceramic Kelvin Cell's strut shape on mechanical properties
In: Open Ceramics 13 (2023), Article No.: 100334
ISSN: 2666-5395
DOI: 10.1016/j.oceram.2023.100334

2022

Abdullayev A., Avcioglu C., Fey T., Hilger A., Osenberg M., Manke I., Henning LM., Gurlo A., Bekheet MF.:
Fabrication and characterization of porous mullite ceramics derived from fluoride-assisted Metakaolin-Al(OH)3 annealing for filtration applications
In: Open Ceramics 9 (2022), Article No.: 100240
ISSN: 2666-5395
DOI: 10.1016/j.oceram.2022.100240
Cai A., Zheng Z., Müller-Seubert W., Biggemann J., Fey T., Beier JP., Horch RE., Friess B., Arkudas A.:
Microsurgical Transplantation of Pedicled Muscles in an Isolation Chamber-A Novel Approach to Engineering Muscle Constructs via Perfusion-Decellularization
In: Journal of Personalized Medicine 12 (2022)
ISSN: 2075-4426
DOI: 10.3390/jpm12030442
Cifuentes SC., Alvarez L., Arias L., Fey T., Tsipas SA.:
Strategies to Control In Vitro Degradation of Mg Scaffolds Processed by Powder Metallurgy
In: Metals 12 (2022), Article No.: 566
ISSN: 2075-4701
DOI: 10.3390/met12040566
Diepold B., Schunk C., Kümmel F., Fey T., Prakash A., Höppel HW., Göken M.:
Fatigue Life Optimized Layer Architecture of Ultrafine-Grained Al-Ti Laminates Under Bending Stresses
In: Advanced Engineering Materials (2022)
ISSN: 1438-1656
DOI: 10.1002/adem.202101143
Eckstein U., Khansur NH., Urushihara D., Asaka T., Kakimoto Ki., Fey T., Webber KG.:
Defect modulated dielectric properties in powder aerosol deposited ceramic thick films
In: Ceramics International 48 (2022), p. 33082-33091
ISSN: 0272-8842
DOI: 10.1016/j.ceramint.2022.07.241
Eichhorn F., Bytomski J., Gerauer M., Kakimoto KI., Fey T.:
Improved Mechanical Amplification of Monolithic PZT and PZT Composite via Optimized Honeycomb Macrostructures
In: Materials 15 (2022), Article No.: 7893
ISSN: 1996-1944
DOI: 10.3390/ma15227893
Eichhorn F., Schiegerl H., Köllner D., Kakimoto KI., Fey T.:
Stress and Deformation Behavior of 2D Composite Cellular Actuator Structures of Ceramic Building Blocks and Epoxy Resins
In: physica status solidi (b) (2022)
ISSN: 0370-1972
DOI: 10.1002/pssb.202100591
Köllner D., Biggemann J., Simon S., Hoffmann P., Kakimoto Ki., Fey T.:
Additive manufactured replica foams
In: Open Ceramics 10 (2022), Article No.: 100258
ISSN: 2666-5395
DOI: 10.1016/j.oceram.2022.100258
Köllner D., Simon S., Niedermeyer S., Spath I., Wolf E., Kakimoto KI., Fey T.:
Relation between Structure, Mechanical and Piezoelectric Properties in Cellular Ceramic Auxetic and Honeycomb Structures
In: Advanced Engineering Materials (2022)
ISSN: 1438-1656
DOI: 10.1002/adem.202201387
Köllner D., Tolve-Granier B., Simon S., Kakimoto KI., Fey T.:
Advanced Estimation of Compressive Strength and Fracture Behavior in Ceramic Honeycombs by Polarimetry Measurements of Similar Epoxy Resin Honeycombs
In: Materials 15 (2022), Article No.: 2361
ISSN: 1996-1944
DOI: 10.3390/ma15072361
Scheffler M., Fey T.:
CELLMAT 2020
In: Advanced Engineering Materials 24 (2022)
ISSN: 1438-1656
DOI: 10.1002/adem.202101618
Wahl L., Maier J., Schmiedeke S., The-An Pham ., Fey T., Webber KG., Travitzky N., Khansur NH.:
Electromechanical properties of paper-derived potassium sodium niobate piezoelectric ceramics
In: Journal of the American Ceramic Society (2022)
ISSN: 0002-7820
DOI: 10.1111/jace.18655

2021

Bernardo E., Elsayed H., Romero AR., Crovace MC., Zanotto ED., Fey T.:
Biosilicate® Glass-Ceramic Foams From Refined Alkali Activation and Gel Casting
In: Frontiers in Materials 7 (2021), Article No.: 588789
ISSN: 2296-8016
DOI: 10.3389/fmats.2020.588789
Biggemann J., Köllner D., Schatz J., Stumpf M., Fey T.:
Influence of µCT scanning resolution and volume on FEM-simulation of periodic 3D-printed porous ceramics
In: Materials Letters 303 (2021), Article No.: 130529
ISSN: 0167-577X
DOI: 10.1016/j.matlet.2021.130529
Biggemann J., Köllner D., Simon S., Heik P., Hoffmann P., Fey T.:
Porous Functional Graded Bioceramics with Integrated Interface Textures
In: Ceramics 4 (2021), p. 681-695
ISSN: 2571-6131
DOI: 10.3390/ceramics4040048
Biggemann J., Stumpf M., Fey T.:
Porous Alumina Ceramics with Multimodal Pore Size Distributions
In: Materials 14 (2021), p. 3294
ISSN: 1996-1944
DOI: 10.3390/ma14123294
Dammler K., Schelm K., Betke U., Fey T., Scheffler M.:
Open-Cellular Alumina Foams with Hierarchical Strut Porosity by Ice Templating: A Thickening Agent Study
In: Materials 14 (2021)
ISSN: 1996-1944
DOI: 10.3390/ma14051060
Eichhorn F., Keppner F., Köllner D., Fey T.:
Deformation Behavior of 2D Composite Cellular Lattices of Ceramic Building Blocks and Epoxy Resin
In: Advanced Engineering Materials (2021)
ISSN: 1438-1656
DOI: 10.1002/adem.202100536
Fey T.:
Determination of the representative volume-of-interest (REVOI) in ceramic replica foams
In: Open Ceramics 7 (2021), Article No.: 100154
ISSN: 2666-5395
DOI: 10.1016/j.oceram.2021.100154
Griseri M., Biggemann J., Ramos JP., Li G., Dams O., Popescu L., Vleugels J., Fey T., Lambrinou K.:
Porous TaCx ISOL target materials from mould-casted Ta4AlC3
In: Journal of the European Ceramic Society (2021)
ISSN: 0955-2219
DOI: 10.1016/j.jeurceramsoc.2021.02.022
Rottensteiner-Brandl U., Bertram U., Lingens L., Köhn K., Distel L., Fey T., Körner C., Horch RE., Arkudas A.:
Free Transplantation of a Tissue Engineered Bone Graft into an Irradiated, Critical-Size Femoral Defect in Rats
In: Cells 10 (2021)
ISSN: 2073-4409
DOI: 10.3390/cells10092256
Steiner D., Winkler S., Heltmann-Meyer S., Trossmann VT., Fey T., Scheibel T., Horch RE., Arkudas A.:
Enhanced vascularization and de novo tissue formation in hydrogels made of engineered RGD-tagged spider silk proteins in the arteriovenous loop model
In: Biofabrication 13 (2021)
ISSN: 1758-5082
DOI: 10.1088/1758-5090/ac0d9b

2020

Biggemann J., Hoffmann P., Hristov I., Simon S., Müller P., Fey T.:
Injection Molding of 3-3 Hydroxyapatite Composites
In: Materials 13 (2020), Article No.: 1907
ISSN: 1996-1944
DOI: 10.3390/ma13081907
URL: https://www.mdpi.com/1996-1944/13/8/1907
Biggemann J., Müller P., Köllner D., Simon S., Hoffmann P., Heik P., Lee JH., Fey T.:
Hierarchical Surface Texturing of Hydroxyapatite Ceramics: Influence on the Adhesive Bonding Strength of Polymeric Polycaprolactone
In: Journal of Functional Biomaterials 11 (2020), Article No.: 73
ISSN: 2079-4983
DOI: 10.3390/jfb11040073
URL: https://www.mdpi.com/2079-4983/11/4/73
Eichhorn F., Kellermann S., Betke U., Fey T.:
Phase evolution, filler-matrix interactions, and piezoelectric properties in lead zirconate titanate (PZT)-filled polymer-derived ceramics (PDCs)
In: Materials 13 (2020), Article No.: 1520
ISSN: 1996-1944
DOI: 10.3390/ma13071520
Khansur NH., Biggemann J., Stumpf M., Rieß K., Fey T., Webber KG.:
Temperature- and Stress-Dependent Electromechanical Response of Porous Pb(Zr,Ti)O3
In: Advanced Engineering Materials (2020)
ISSN: 1438-1656
DOI: 10.1002/adem.202000389
Myszka B., Schodder P., Leupold S., Barr M., Hurle K., Schüßler M., Demmert B., Biggemann J., Fey T., Boccaccini AR., Wolf S.:
Shape Matters: Crystal Morphology and Surface Topography Alter Bioactivity of Bioceramics in Simulated Body Fluid
In: Advanced Engineering Materials (2020)
ISSN: 1438-1656
DOI: 10.1002/adem.202000044
Winkler S., Mutschall H., Biggemann J., Fey T., Greil P., Körner C., Weisbach VG., Meyer-Lindenberg A., Arkudas A., Horch RE., Steiner D.:
Human Umbilical Vein Endothelial Cell Support Bone Formation of Adipose-Derived Stem Cell-Loaded and 3D-Printed Osteogenic Matrices in the Arteriovenous Loop Model
In: Tissue Engineering - Part A (2020)
ISSN: 1937-335X
DOI: 10.1089/ten.tea.2020.0087

2019

Eichhorn F., Kakimoto Ki., Greil P., Fey T.:
Influence of Porosity Orientation on Physical Properties in Porous PZT Ceramics
In: Advanced Engineering Materials (2019), Article No.: 1900390
ISSN: 1438-1656
DOI: 10.1002/adem.201900390
Elsayed H., Chmielarz A., Potoczek M., Fey T., Colombo P.:
Direct ink writing of three dimensional Ti2AlC porous structures
In: Additive Manufacturing 28 (2019), p. 365-372
ISSN: 2214-7810
DOI: 10.1016/j.addma.2019.05.018
Fey T., Scheffler M., Travitzky N.:
Celebrating the 65(th) Birthday of Professor Peter Greil
In: Advanced Engineering Materials 21 (2019)
ISSN: 1438-1656
DOI: 10.1002/adem.201900484
Filardo G., Roffi A., Fey T., Fini M., Giavaresi G., Marcacci M., Martínez-Fernández J., Martini L., Ramírez-Rico J., Salamanna F., Sandri M., Sprio S., Tampieri A., Kon E.:
Vegetable hierarchical structures as template for bone regeneration: New bio-ceramization process for the development of a bone scaffold applied to an experimental sheep model
In: Journal of Biomedical Materials Research Part B: Applied Biomaterials (2019)
ISSN: 1552-4973
DOI: 10.1002/jbm.b.34414
Gelse K., Biggemann J., Stumpf M., Halmheu M., Grüneboom A., Scholtysek C., Pachowsky M., Kleyer A., Hueber A., Krönke G., Fey T.:
Modular lattice constructs for biological joint resurfacing
In: Tissue Engineering: Parts A, B, and C (2019)
ISSN: 1937-3368
DOI: 10.1089/ten.TEA.2018.0231
Obmann R., Schoerpf S., Gorsche C., Liska R., Fey T., Konegger T.:
Porous polysilazane-derived ceramic structures generated through photopolymerization-assisted solidification templating
In: Journal of the European Ceramic Society 39 (2019), p. 838-845
ISSN: 0955-2219
DOI: 10.1016/j.jeurceramsoc.2018.11.045
Schelm K., Fey T., Dammler K., Betke U., Scheffler M.:
Hierarchical-Porous Ceramic Foams by a Combination of Replica and Freeze Technique
In: Advanced Engineering Materials (2019)
ISSN: 1438-1656
DOI: 10.1002/adem.201801362
Steiner D., Lang G., Fischer L., Winkler S., Fey T., Greil P., Scheibel T., Horch RE., Arkudas A.:
Intrinsic Vascularization of Recombinant eADF4(C16) Spider Silk Matrices in the Arteriovenous Loop Model
In: Tissue Engineering: Parts A, B, and C (2019)
ISSN: 1937-3368
DOI: 10.1089/ten.tea.2018.0360
Stumpf M., Fan X., Biggemann J., Greil P., Fey T.:
Topological interlocking and damage mechanisms in periodic Ti2AlC-Al building block composites
In: Journal of the European Ceramic Society 39 (2019), p. 2003-2009
ISSN: 0955-2219
DOI: 10.1016/j.jeurceramsoc.2019.01.047
URL: https://authors.elsevier.com/c/1YbUm3PCJlBdlx
Stumpf M., Köllner D., Biggemann J., Schüßler M., Greil P., Fey T.:
Encapsulation of Reactive Ti2AlC and Nb2AlC Particles via a Boehmite Precipitation Route
In: Advanced Engineering Materials 21 (2019), Article No.: 1900048
ISSN: 1438-1656
DOI: 10.1002/adem.201900048

2018

Biggemann J., Diepold B., Pezoldt M., Stumpf M., Greil P., Fey T.:
Automated 3D assembly of periodic alumina-epoxy composite structures
In: Journal of the American Ceramic Society (2018)
ISSN: 0002-7820
DOI: 10.1111/jace.15586
Biggemann J., Diepold B., Pezoldt M., Stumpf M., Greil P., Fey T.:
Automated 3D assembly of periodic alumina‐epoxy composite structures
In: Journal of the American Ceramic Society 101 (2018), p. 3864-3873
ISSN: 1551-2916
DOI: 10.1111/jace.15586
Biggemann J., Pezoldt M., Stumpf M., Greil P., Fey T.:
Modular ceramic scaffolds for individual implants
In: Acta Biomaterialia 80 (2018), p. 390-400
ISSN: 1742-7061
DOI: 10.1016/j.actbio.2018.09.008
Fey T., Stumpf M., Chmielarz A., Colombo P., Greil P., Potoczek M.:
Microstructure, thermal conductivity and simulation of elastic modulus of MAX-phase (Ti2AlC) gel-cast foams
In: Journal of the European Ceramic Society 38 (2018), p. 3424-3432
ISSN: 0955-2219
DOI: 10.1016/j.jeurceramsoc.2018.04.012
Fey T., Stumpf M., Chmielarz AM., Colombo P., Greil P., Potoczek M.:
Microstructure, thermal conductivity and simulation of elastic modulus of MAX-phase (Ti2AlC) gel-cast foams
In: Journal of the European Ceramic Society 38 (2018), p. 3424-3432
ISSN: 0955-2219
DOI: 10.1016/j.jeurceramsoc.2018.04.012
Menge G., Lorenz H., Fu Z., Eichhorn F., Schader F., Webber KG., Fey T., Greil P., Travitzky N.:
Paper-Derived Ferroelectric Ceramics: A Feasibility Study
In: Advanced Engineering Materials (2018)
ISSN: 1438-1656
DOI: 10.1002/adem.201800052
Steiner D., Lingens L., Fischer L., Köhn K., Detsch R., Boccaccini AR., Fey T., Greil P., Weis C., Beier J., Horch RE., Arkudas A.:
Encapsulation of Mesenchymal Stem Cells Improves Vascularization of Alginate-Based Scaffolds.
In: Tissue Engineering: Parts A, B, and C 24 (2018), p. 1320-1331
ISSN: 1937-3368
DOI: 10.1089/ten.TEA.2017.0496
Stumpf M., Biggemann J., Fey T., Kakimoto KI., Greil P.:
Nb2AlC-Particle-Reinforced ZrO2-Matrix Composites
In: Journal of Ceramic Science and Technology 9 (2018), p. 271-278
ISSN: 2190-9385
DOI: 10.4416/JCST2018-00013
Stumpf M., Biggemann J., Fey T., Kakimoto KI., Greil P.:
Thermochemical calculations of the oxidation behavior of Nb2AlC MAX phase in ZrO2–matrix composites
In: Ceramics International 44 (2018), p. 15747-15753
ISSN: 0272-8842
DOI: 10.1016/j.ceramint.2018.05.249
Stumpf M., Fey T., Kakimoto K., Greil P.:
Nb2AlC-particle induced accelerated crack healing in ZrO2–matrix composites
In: Ceramics International 44 (2018), p. 19352-19361
ISSN: 0272-8842
DOI: 10.1016/j.ceramint.2018.07.164
URL: https://www.sciencedirect.com/science/article/pii/S0272884218319072
Stumpf M., Travitzky N., Greil P., Fey T.:
Sol-gel infiltration of complex cellular indirect 3D printed alumina
In: Journal of the European Ceramic Society 38 (2018), p. 3603-3609
ISSN: 0955-2219
DOI: 10.1016/j.jeurceramsoc.2018.04.023
Unterweger H., Dezsi L., Matuszak J., Janko C., Poettler M., Jordan J., Bäuerle T., Szebeni J., Fey T., Boccaccini AR., Alexiou C., Cicha I.:
Dextran-coated superparamagnetic iron oxide nanoparticles for magnetic resonance imaging: Evaluation of size-dependent imaging properties, storage stability and safety
In: International Journal of Nanomedicine 13 (2018), p. 1899-1915
ISSN: 1176-9114
DOI: 10.2147/IJN.S156528

2017

Eichhorn F., Biggemann J., Kellermann S., Kawai A., Kato K., Kakimoto KI., Fey T.:
Influence of Cell Size on Mechanical and Piezoelectric Properties of PZT and LNKN Ceramic Foams
In: Advanced Engineering Materials (2017)
ISSN: 1438-1656
DOI: 10.1002/adem.201700420
Eichhorn F., Stenzel A., Weisenseel B., Travitzky N., Kakimoto KI., Greil P., Fey T.:
Porous piezoelectric ceramics with 3-3-connectivity fabricated by impregnation of cellulose paper structures
In: Materials Letters 206 (2017), p. 158-161
ISSN: 0167-577X
DOI: 10.1016/j.matlet.2017.07.007
Großberger S., Fey T., Lee G.:
Freezing kinetics of vacuum-induced surface directional freezing in a glass vial
In: Chemical Engineering Science 167 (2017), p. 154-160
ISSN: 0009-2509
DOI: 10.1016/j.ces.2017.03.066
Großberger S., Fey T., Lee G.:
Tortuosity of aligned channels in alumina membranes produced by vacuum-induced surface directional freezing
In: Materials 10 (2017), Article No.: 409
ISSN: 1996-1944
DOI: 10.3390/ma10040409
Hiemer S., Fey T., Kaschta J., Schubert DW.:
A comparative study of mechanical properties of table tennis balls
54th Nordic Polymer Days (Stockholm)
Rottensteiner-Brandl U., Distel L., Stumpf M., Fey T., Köhn K., Bertram U., Lingens L., Greil P., Horch RE., Arkudas A.:
Influence of different irradiation protocols on vascularization and bone formation parameters in rat femora.
In: Tissue Engineering - Part C: Methods 23 (2017), p. 583-591
ISSN: 1937-3392
DOI: 10.1089/ten.TEC.2017.0170
Weisenseel B., Harris J., Stumpf M., Wolf S., Fey T., Greil P.:
Enhancement of the Carbothermal Reduction of Hafnium Oxide by Silicon
In: Advanced Engineering Materials 19 (2017), p. 1600377
ISSN: 1438-1656
DOI: 10.1002/adem.201600377
Zierath B., Greil P., Stumpf M., Fey T.:
Enforcing of Mechanical Properties of Alumina Foams
In: J. C. LaSalvia, R. Narayan, P. Colombo, M. Fukushima and A. Gyekenyesi (ed.): Advances in Ceramic Armor, Bioceramics, and Porous Materials, John Wiley & Sons, Inc., 2017, p. 149-162 (Ceramic Engineering and Science Proceedings, Vol.37)
ISBN: 9781119321682
DOI: 10.1002/9781119321682.ch16

2016

Boccardi E., Philippart A., Melli V., Altomare L., De Nardo L., Novajra G., Vitale-Brovarone C., Fey T., Boccaccini AR.:
Bioactivity and Mechanical Stability of 45S5 Bioactive Glass Scaffolds Based on Natural Marine Sponges
In: Annals of Biomedical Engineering 44 (2016), p. 1881-1893
ISSN: 0090-6964
DOI: 10.1007/s10439-016-1595-5
Böhm C., Demmert B., Harris J., Fey T., Marin F., Wolf S.:
Structural commonalities and deviations in the hierarchical organization of crossed-lamellar shells: A case study on the shell of the bivalve Glycymeris glycymeris
In: Journal of Materials Research 31 (2016), p. 536-546
ISSN: 0884-2914
DOI: 10.1557/jmr.2016.46
Großberger S., Fey T., Lee G.:
Vacuum-induced surface freezing to produce monoliths of aligned porous alumina
In: Materials 9 (2016), Article No.: 983
ISSN: 1996-1944
DOI: 10.3390/ma9120983
Kern A., Zierath B., Fey T., Etzold B.:
Adsorption of Nickel Ions on Oxygen-Functionalized Carbons
In: Chemical Engineering & Technology 39 (2016), p. 715-722
ISSN: 0930-7516
DOI: 10.1002/ceat.201500694
Kern A., Zierath B., Haertle J., Fey T., Etzold B.:
Thermal and Electrical Conductivity of Amorphous and Graphitized Carbide-Derived Carbon Monoliths
In: Chemical Engineering & Technology 39 (2016), p. 1121-1129
ISSN: 0930-7516
DOI: 10.1002/ceat.201600011
Miguez Pacheco V., Büttner T., Macon ALB., Jones JR., Fey T., de Ligny D., Greil P., Chevalier J., Malchere A., Boccaccini AR.:
Development and characterization of lithium-releasing silicate bioactive glasses and their scaffolds for bone repair
In: Journal of Non-Crystalline Solids 432 (2016), p. 65-72
ISSN: 0022-3093
DOI: 10.1016/j.jnoncrysol.2015.03.027
Stumpf M., Fey T., Greil P.:
Thermochemical calculations of the stability of Ti2AlC in various atmospheres
In: Journal of Ceramic Science and Technology 7 (2016), p. 223-227
ISSN: 2190-9385
DOI: 10.4416/JCST2016-00029
Tangermann-Gerk K., Barroso GS., Weisenseel B., Greil P., Fey T., Schmidt M., Motz G.:
Laser pyrolysis of an organosilazane-based glass/ZrO2 composite coating system
In: Materials & Design 109 (2016), p. 644-651
ISSN: 0264-1275
DOI: 10.1016/j.matdes.2016.07.102
Weisenseel B., Greil P., Fey T.:
Biomorphous Silicon Carbide as Novel Loop Heat Pipe Wicks
In: Advanced Engineering Materials (2016)
ISSN: 1438-1656
DOI: 10.1002/adem.201600379
Zake-Tiluga I., Svinka V., Svinka R., Zierath B., Greil P., Fey T.:
Thermal conductivity and microstructure characterisation of lightweight alumina and alumina-mullite ceramics
In: Journal of the European Ceramic Society 36 (2016), p. 1469-1477
ISSN: 0955-2219
DOI: 10.1016/j.jeurceramsoc.2015.12.026

2015

Bei GP., Pedimonte BJ., Pezoldt M., Ast J., Fey T., Göken M., Greil P.:
Crack Healing in Ti2Al0.5Sn0.5C-Al2O3 Composites
In: Journal of the American Ceramic Society 98 (2015), p. 1604-1610
ISSN: 0002-7820
DOI: 10.1111/jace.13496
Qasim S., Delaine-Smith R., Rawlinson A., Fey T., Rehman I.:
Freeze gelated porous membranes for periodontal tissue regeneration
In: Acta Biomaterialia 23 (2015), p. 317-328
ISSN: 1742-7061
DOI: 10.1016/j.actbio.2015.05.001
Weisenseel B., Zierath B., Fey T., Greil P.:
Adjustment of the Optical Properties of Dispersion Derived Carbon Nanotube Coatings
In: Advanced Engineering Materials (2015)
ISSN: 1438-1656
DOI: 10.1002/adem.201500343
Zorzin JI., Maier E., Harre S., Fey T., Belli R., Lohbauer U., Petschelt A., Taschner M.:
Bulk-fill resin composites: Polymerization properties and extended light curing
In: Dental Materials 31 (2015), p. 293-301
ISSN: 0109-5641
DOI: 10.1016/j.dental.2014.12.010

2014

Adam M., Kocanis S., Fey T., Wilhelm M., Grathwohl G.:
Hierarchically ordered foams derived from polysiloxanes with catalytically active coatings
In: Journal of the European Ceramic Society 34 (2014), p. 1715-1725
ISSN: 0955-2219
DOI: 10.1016/j.jeurceramsoc.2013.12.011
Fey T., Zierath B., Kern A., Greil P., Etzold B.:
An advanced method to manufacture hierarchically structured carbide-derived carbon monoliths
In: Carbon 70 (2014), p. 30-37
ISSN: 0008-6223
DOI: 10.1016/j.carbon.2013.12.052
Hoppe A., Jokic B., Janackovic D., Fey T., Greil P., Romeis S., Schmidt J., Peukert W., Lao J., Jallot E., Boccaccini AR.:
Cobalt-Releasing 1393 Bioactive Glass-Derived Scaffolds for Bone Tissue Engineering Applications
In: ACS Applied Materials and Interfaces 6 (2014), p. 2865-2877
ISSN: 1944-8244
DOI: 10.1021/am405354y
Jakobsen BD., Hammerbacher R., Dudczig S., Fey T., Roosen A.:
Manufacture of Rotationally Symmetric Multilayer Refractory Devices for Steel Casting Applications by Spiral Winding of Ceramic Green Tapes
In: Journal of Ceramic Science and Technology 5 (2014), p. 137-144
ISSN: 2190-9385
DOI: 10.4416/JCST2013-00040
Krishnan S., Fey T., Greil P.:
SILICONBORONOXYCARBIDE (SIBOC) FOAM FROM METHYL BOROSILOXANE
In: Ceramic Transactions 243 (2014), p. 47-60
ISSN: 1042-1122
Pedimonte B., Bei G., Pourjafar D., Fey T., Greil P.:
Oxidative Crack Healing in Al2O3 Composites Loaded with Ti(2)AC (A = Al, Sn) Repair Fillers
In: Journal of Ceramic Science and Technology 5 (2014), p. 63-67
ISSN: 2190-9385
DOI: 10.4416/JCST2013-00044
Pedimonte B., Moest T., Luxbacher T., von Wilmowsky C., Fey T., Schlegel A., Greil P.:
Morphological zeta-potential variation of nanoporous anodic alumina layers and cell adherence
In: Acta Biomaterialia 10 (2014), p. 968-974
ISSN: 1742-7061
DOI: 10.1016/j.actbio.2013.09.023
Saxena P., Walter B., Kaschta J., Fey T., Steinmann P., Schubert DW.:
Thermodynamically Consistent Model to Predict the Magneto-Rheological Behavior of Magneto-Sensitive Elastomers
9th Annual European Rheology Conference (Karlsruhe, 8. April 2014 - 11. April 2014)
Travitzky N., Bonet A., Dermeik B., Fey T., Filbert-Demut I., Schlier L., Schlordt T., Greil P.:
Additive Manufacturing of Ceramic-Based Materials
In: Advanced Engineering Materials 16 (2014), p. 729-754
ISSN: 1438-1656
DOI: 10.1002/adem.201400097

2013

Arkudas A., Balzer A., Bührer G., Arnold I., Hoppe A., Detsch R., Newby P., Fey T., Greil P., Horch RE., Boccaccini AR., Kneser U.:
Evaluation of angiogenesis of bioactive glass in the arteriovenous loop model
In: Tissue Engineering - Part C: Methods 19 (2013), p. 479-486
ISSN: 1937-3384
DOI: 10.1089/ten.tec.2012.0572
Fey T., Goetz M., Greil P.:
Photoelastic Imaging of Residual Stress Distribution in Epoxy Interface Layers of Ceramics with Periodic Building-Block Structure
In: Advanced Engineering Materials 15 (2013), p. 1099-1104
ISSN: 1438-1656
DOI: 10.1002/adem.201300034
Schlordt T., Schwanke S., Keppner F., Fey T., Travitzky N., Greil P.:
Robocasting of alumina hollow filament lattice structures
In: Journal of the European Ceramic Society 33 (2013), p. 3243-3248
ISSN: 0955-2219
DOI: 10.1016/j.jeurceramsoc.2013.06.001

2012

Ceron Nicolat B., Wolff F., Dakkouri AS., Fey T., Münstedt H., Greil P.:
Graded Cellular Ceramics from Continuous Foam Extrusion
In: Advanced Engineering Materials 14 (2012), p. 1097-1103
ISSN: 1438-1656
DOI: 10.1002/adem.201200039
Götz M., Fey T., Greil P.:
Vibration Assisted Self-Assembly Processing of Ceramic-Based Composites with Modular Meta-Structure
In: Journal of the American Ceramic Society 95 (2012), p. 95-101
ISSN: 0002-7820
DOI: 10.1111/j.1551-2916.2011.04844.x
Kang YJ., Fey T., Greil P.:
Synthesis of Ti2SnC MAX Phase by Mechanical Activation and Melt Infiltration
In: Advanced Engineering Materials 14 (2012), p. 85-91
ISSN: 1438-1656
DOI: 10.1002/adem.201100186
Van Opdenbosch D., Thielen M., Seidel R., Fritz-Popovski G., Fey T., Paris O., Speck T., Zollfrank C.:
The pomelo peel and derived nanoscale-precision gradient silica foams
In: Bioinspired, Biomimetic and Nanobiomaterials 1 (2012), p. 117-122
ISSN: 2045-9858
DOI: 10.1680/bbn.11.00013
Winkel A., Meszaros R., Reinsch S., Mueller R., Travitzky N., Fey T., Greil P., Wondraczek L.:
Sintering of 3D-Printed Glass/HAp Composites
In: Journal of the American Ceramic Society 95 (2012), p. 3387-3393
ISSN: 0002-7820
DOI: 10.1111/j.1551-2916.2012.05368.x
Wolff F., Ceron Nicolat B., Fey T., Greil P., Münstedt H.:
Extrusion Foaming of a Preceramic Silicone Resin with a Variety of Profiles and Morphologies
In: Advanced Engineering Materials 14 (2012), p. 1110-1115
ISSN: 1438-1656
DOI: 10.1002/adem.201100351

2011

Hahn E., Fey T., Zuo K., Jiang D-., Greil P.:
Residual Stress Strengthening in Layered Tricalcium Phosphate (TCP) Bioceramics
In: Journal of Ceramic Science and Technology 2 (2011), p. 133-138
ISSN: 2190-9385
DOI: 10.4416/JCST2011-00005
Meszaros R., Zhao R., Travitzky N., Fey T., Greil P., Wondraczek L.:
Three-dimensional printing of a bioactive glass
In: Glass Technology-European Journal of Glass Science and Technology Part A 52 (2011), p. 111-116
ISSN: 1753-3546
Schmirler M., Knorr T., Fey T., Lynen A., Greil P., Etzold B.:
Fast production of monolithic carbide-derived carbons with secondary porosity produced by chlorination of carbides containing a free metal phase
In: Carbon 49 (2011), p. 4359-4367
ISSN: 0008-6223
DOI: 10.1016/j.carbon.2011.06.013
Wolff F., Zirkel L., Sarah B., Jakob M., Verena M., Nachtrab F., Ceron Nicolat B., Fey T., Münstädt H.:
Using Supercritical Carbon Dioxide for Physical Foaming of Advanced Polymer Materials
In: International Polymer Processing 26 (2011), p. 437-443
ISSN: 0930-777X
DOI: 10.3139/217.2469

2010

Ceron-Nicolat B., Fey T., Greil P.:
Processing of Ceramic Foams with Hierarchical Cell Structure
In: Advanced Engineering Materials 12 (2010), p. 884-892
ISSN: 1438-1656
DOI: 10.1002/adem.201000114
Gomes CM., Gutbrod B., Travitzky N., Fey T., Greil P.:
PRECERAMIC PAPER DERIVED FIBRILLAR CERAMICS
In: Ceramic Transactions 210 (2010), p. 421-427
ISSN: 1042-1122

2008

de Sousa E, Rambo CR, Hotza D, de Oliveira APN, Fey T, Greil P:
Microstructure and properties of LZSA glass-ceramic foams
In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 476 (2008), p. 89-97
ISSN: 0921-5093
DOI: 10.1016/j.msea.2007.05.098
Rambo CR., Andrade T., Fey T., Sieber H., Martinelli AE., Greil P.:
Microcellular Al2O3 ceramics from wood for filter applications
In: Journal of the American Ceramic Society 91 (2008), p. 852-859
ISSN: 0002-7820
DOI: 10.1111/j.1551-2916.2007.02223.x
Travitzky N., Windsheimer H., Fey T., Greil P.:
Preceramic Paper-Derived Ceramics
In: Journal of the American Ceramic Society 91 (2008), p. 3477-3492
ISSN: 0002-7820
DOI: 10.1111/j.1551-2916.2008.02752.x

2007

Haas D., Fey T., Greil P.:
Biornorphous metal-ceramic-composites with high coefficient of friction
In: Advanced Engineering Materials 9 (2007), p. 892-897
ISSN: 1438-1656
DOI: 10.1002/adem.200700137

2006

Zampieri A, Kullmann S, Selvam T, Bauer J, Schwieger W, Sieber H, Fey T, Greil P:
Bioinspired Rattan-derived SiSiC/zeolite monoliths: Preparation and characterisation
In: Microporous and Mesoporous Materials 90 (2006), p. 162-174
ISSN: 1387-1811
DOI: 10.1016/j.micromeso.2005.10.049

2005

Silveira C, Sousa E, Moraes E, Oliveira APN, Hotza D, Fey T, Greil P:
CHARACTERISATION OF LZSA GLASS CERAMICS FILTERS OBTAINED BY THE REPLICATION METHOD
In: Ceramic Engineering and Science Proceedings 26 (2005), p. 53-59
ISSN: 0196-6219
Muller L, Muller FA, Zeschky J, Fey T, Greil P:
Fabrication of hydroxyapatite ceramics with interconnected macro porosity
In: Key Engineering Materials 284-286 (2005), p. 277-280
ISSN: 1013-9826
Sousa E, Silveira CB, Fey T, Greil P, Hotza D, de Oliveira APN:
LZSA glass ceramic foams prepared by replication process
In: Advances in Applied Ceramics 104 (2005), p. 22-29
ISSN: 1743-6753
DOI: 10.1179/174367605225011043
Fey T., Sieber H., Greil P.:
Formation of highly-porous biomorphous SiC-ceramics derived from cellulose paper

2002

Greil P, Vogli E, Fey T, Bezold A, Popovska N, Gerhard H, Sieber H:
Effect of microstructure on the fracture behavior of biomorphous silicon carbide ceramics
In: Journal of the European Ceramic Society 22 (2002), p. 2697-2707
ISSN: 0955-2219