PD Dr.-Ing. habil. Tobias Fey

2026

• Funk S., Stötzel T., Fey T.:
  Geometric angle tuning unlocks exceptional mechanical strength in VPP-printed Al₂O₃ Kelvin Cells
  In: Open Ceramics 26 (2026), Article No.: 100968
  ISSN: 2666-5395
  DOI: 10.1016/j.oceram.2026.100968
• Weinhold CM., Heltmann-Meyer S., Ng XJ., Scheibel T., Fey T., Wajant H., Geppert CI., Arkudas A., Steiner D., Horch RE.:
  Biofabrication of Endothelialized, Intrinsically Vascularized 3D-Printed Recombinant Spider Silk Scaffolds
  In: Advanced Healthcare Materials (2026)
  ISSN: 2192-2640
  DOI: 10.1002/adhm.202504883
• Wolf E., Eckstein U., Webber KG., Fey T.:
  Identifying critical powder properties for high-throughput dispensing of alumina and organic templates
  In: Ceramics International (2026)
  ISSN: 0272-8842
  DOI: 10.1016/j.ceramint.2026.03.331

2025

• Diamanti V., Elsayed H., Fey T., Bernardo E.:
  Effect of MgO and Al2O3 precursors on 3D-printed cordierite lattice structures by a novel emulsion-based PDC route
  In: Journal of the American Ceramic Society (2025)
  ISSN: 0002-7820
  DOI: 10.1111/jace.70037
• Funk S., Wolf E., Weichelt M., Martin A., Kakimoto Ki., Fey T.:
  Keep it simple: Fast processing of periodic BCZT structures by combination of VPP and replica technique
  In: Open Ceramics 22 (2025), Article No.: 100761
  ISSN: 2666-5395
  DOI: 10.1016/j.oceram.2025.100761
• Hoffmann P., Wahl L., Funk S., Fey T.:
  From timeless Japanese wood joinery to advanced ceramic joint interlocking
  In: Discover Materials 5 (2025), Article No.: 74
  ISSN: 2730-7727
  DOI: 10.1007/s43939-025-00250-6
• Kim J., Kim DH., Sundharbaabu PR., Lee CY., Bae J., Hyun J., Jang YJ., Kim H., Hong MH., Liu J., Fey T., Bhang SH., Heo JH., Lee JH.:
  DENTA: A Dual Enzymatic Nanoagent for Self-Activating Tooth Whitening and Biofilm Disruption
  In: Advanced Functional Materials (2025)
  ISSN: 1616-301X
  DOI: 10.1002/adfm.202510924
• Osterloh J., Heltmann-Meyer S., Trossmann VT., Cai A., Kulicke Y., Terörde K., Sörgel C., Lang I., Wajant H., Scheibel T., Fey T., Steiner D., Arkudas A., Horch RE.:
  In Vivo Vascularization of Cell-Supplemented Spider Silk-Based Hydrogels in the Arteriovenous Loop Model
  In: Biomimetics 10 (2025), Article No.: 117
  ISSN: 2313-7673
  DOI: 10.3390/biomimetics10020117
• Wahl L., Köllner D., Weichelt M., Travitzky N., Fey T.:
  Environmentally friendly water-based robocasting of complex barium titanate structures
  In: Open Ceramics 22 (2025), Article No.: 100773
  ISSN: 2666-5395
  DOI: 10.1016/j.oceram.2025.100773
• Weichelt M., Wahl L., Travitzky N., Fey T.:
  Co–extrusion of alumina core–shell structures fabricated by robocasting
  In: Open Ceramics 23 (2025), Article No.: 100805
  ISSN: 2666-5395
  DOI: 10.1016/j.oceram.2025.100805

2024

• Eckstein U., Kuhfuß M., Fey T., Webber KG.:
  Feasibility of Powder-Based High-Throughput Synthesis for Ceramics Development: Case Study on the Influence of Calcination Temperature in BiFeO3-BaTiO3
  In: Advanced Engineering Materials (2024)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202302126
• Hoffmann P., Simon S., Zierath B., Fey T.:
  Advanced Hierarchical Biomorphous Silicon Carbide Monoliths
  In: Advanced Engineering Materials (2024)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202302227
• Marques LS., Weichelt M., Kuhfuß M., Rambo CR., Fey T.:
  Novel Sol-Gel Synthesis Route for Ce- and V-Doped Ba0.85Ca0.15Ti0.9Zr0.1O3 Piezoceramics
  In: Materials 17 (2024), Article No.: 3228
  ISSN: 1996-1944
  DOI: 10.3390/ma17133228
• Martin A., Kato N., Fey T., Webber KG., Kakimoto Ki.:
  Increased thermal stability by the addition of ZrO2 into a 0.48Ba(Zr0.2Ti0.8)O3-0.52(Ba0.7Ca0.3)TiO3 matrix material
  In: Japanese Journal of Applied Physics 63 (2024), Article No.: 09SP02
  ISSN: 0021-4922
  DOI: 10.35848/1347-4065/ad6c58
• Simon S., Hoffmann P., Stötzel T., Weber J., Fey T.:
  Keep it Simple: Ceramic Kelvin Cells via Liquid Crystal Display-Stereolithography Printing
  In: Advanced Engineering Materials (2024)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202302228

2023

• Avramovska M., Freude D., Schwieger W., Fey T., Kärger J., Haase J.:
  NMR Studies of the Rehydroxylation of Ceramic Materials with Respect to Rehydroxylation Dating
  In: Journal of Physical Chemistry C (2023)
  ISSN: 1932-7447
  DOI: 10.1021/acs.jpcc.3c05189
• Hoffmann P., Köllner D., Simon S., Kakimoto Ki., Fey T.:
  Modular lead-free piezoceramic/polymer composites with locally adjustable piezoelectric properties
  In: Open Ceramics 13 (2023), Article No.: 100320
  ISSN: 2666-5395
  DOI: 10.1016/j.oceram.2022.100320
• Köllner D., Niedermeyer S., Vermes M., Simon S., Kakimoto Ki., Fey T.:
  Energy-Reduced Fabrication of Light-Frame Ceramic Honeycombs by Replication of Additive Manufactured Templates
  In: Materials 16 (2023), Article No.: 4924
  ISSN: 1996-1944
  DOI: 10.3390/ma16144924
• Nawaz Q., Fiedler T., Biggemann J., Fey T., Boccaccini AR.:
  Flexural strength of biopolymer coated bioactive glass (45S5) sintered struts for bone tissue engineering applications
  In: Materials Letters 337 (2023), Article No.: 133957
  ISSN: 0167-577X
  DOI: 10.1016/j.matlet.2023.133957
• Simon S., Köllner D., Hoffmann P., Keck E., Spath I., Meyse M., Fey T.:
  Influence of ceramic Kelvin Cell's strut shape on mechanical properties
  In: Open Ceramics 13 (2023), Article No.: 100334
  ISSN: 2666-5395
  DOI: 10.1016/j.oceram.2023.100334

2022

• Abdullayev A., Avcioglu C., Fey T., Hilger A., Osenberg M., Manke I., Henning LM., Gurlo A., Bekheet MF.:
  Fabrication and characterization of porous mullite ceramics derived from fluoride-assisted Metakaolin-Al(OH)3 annealing for filtration applications
  In: Open Ceramics 9 (2022), Article No.: 100240
  ISSN: 2666-5395
  DOI: 10.1016/j.oceram.2022.100240
• Cai A., Zheng Z., Müller-Seubert W., Biggemann J., Fey T., Beier JP., Horch RE., Friess B., Arkudas A.:
  Microsurgical Transplantation of Pedicled Muscles in an Isolation Chamber-A Novel Approach to Engineering Muscle Constructs via Perfusion-Decellularization
  In: Journal of Personalized Medicine 12 (2022)
  ISSN: 2075-4426
  DOI: 10.3390/jpm12030442
• Diepold B., Schunk C., Kümmel F., Fey T., Prakash A., Höppel HW., Göken M.:
  Fatigue Life Optimized Layer Architecture of Ultrafine-Grained Al-Ti Laminates Under Bending Stresses
  In: Advanced Engineering Materials (2022)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202101143
• Eckstein U., Khansur NH., Urushihara D., Asaka T., Kakimoto Ki., Fey T., Webber KG.:
  Defect modulated dielectric properties in powder aerosol deposited ceramic thick films
  In: Ceramics International 48 (2022), p. 33082-33091
  ISSN: 0272-8842
  DOI: 10.1016/j.ceramint.2022.07.241
• Eichhorn F., Bytomski J., Gerauer M., Kakimoto Ki., Fey T.:
  Improved Mechanical Amplification of Monolithic PZT and PZT Composite via Optimized Honeycomb Macrostructures
  In: Materials 15 (2022), Article No.: 7893
  ISSN: 1996-1944
  DOI: 10.3390/ma15227893
• Fey T., Simon U., Fukushima M., Smith DS.:
  Editorial - Porous ceramics
  In: Open Ceramics 10 (2022), Article No.: 100273
  ISSN: 2666-5395
  DOI: 10.1016/j.oceram.2022.100273
• Köllner D., Biggemann J., Simon S., Hoffmann P., Kakimoto Ki., Fey T.:
  Additive manufactured replica foams
  In: Open Ceramics 10 (2022), Article No.: 100258
  ISSN: 2666-5395
  DOI: 10.1016/j.oceram.2022.100258
• Köllner D., Tolve-Granier B., Simon S., Kakimoto Ki., Fey T.:
  Advanced Estimation of Compressive Strength and Fracture Behavior in Ceramic Honeycombs by Polarimetry Measurements of Similar Epoxy Resin Honeycombs
  In: Materials 15 (2022), Article No.: 2361
  ISSN: 1996-1944
  DOI: 10.3390/ma15072361
• Scheffler M., Fey T.:
  CELLMAT 2020
  In: Advanced Engineering Materials 24 (2022)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202101618
• Wahl L., Maier J., Schmiedeke S., The-An Pham ., Fey T., Webber KG., Travitzky N., Khansur NH.:
  Electromechanical properties of paper-derived potassium sodium niobate piezoelectric ceramics
  In: Journal of the American Ceramic Society (2022)
  ISSN: 0002-7820
  DOI: 10.1111/jace.18655

2021

• Bernardo E., Elsayed H., Romero AR., Crovace MC., Zanotto ED., Fey T.:
  Biosilicate® Glass-Ceramic Foams From Refined Alkali Activation and Gel Casting
  In: Frontiers in Materials 7 (2021), Article No.: 588789
  ISSN: 2296-8016
  DOI: 10.3389/fmats.2020.588789
• Biggemann J., Köllner D., Schatz J., Stumpf M., Fey T.:
  Influence of µCT scanning resolution and volume on FEM-simulation of periodic 3D-printed porous ceramics
  In: Materials Letters 303 (2021), Article No.: 130529
  ISSN: 0167-577X
  DOI: 10.1016/j.matlet.2021.130529
• Biggemann J., Köllner D., Simon S., Heik P., Hoffmann P., Fey T.:
  Porous Functional Graded Bioceramics with Integrated Interface Textures
  In: Ceramics 4 (2021), p. 681-695
  ISSN: 2571-6131
  DOI: 10.3390/ceramics4040048
• Biggemann J., Stumpf M., Fey T.:
  Porous Alumina Ceramics with Multimodal Pore Size Distributions
  In: Materials 14 (2021), p. 3294
  ISSN: 1996-1944
  DOI: 10.3390/ma14123294
• Dammler K., Schelm K., Betke U., Fey T., Scheffler M.:
  Open-Cellular Alumina Foams with Hierarchical Strut Porosity by Ice Templating: A Thickening Agent Study
  In: Materials 14 (2021)
  ISSN: 1996-1944
  DOI: 10.3390/ma14051060
• Eichhorn F., Keppner F., Köllner D., Fey T.:
  Deformation Behavior of 2D Composite Cellular Lattices of Ceramic Building Blocks and Epoxy Resin
  In: Advanced Engineering Materials (2021)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202100536
• Fey T.:
  Determination of the representative volume-of-interest (REVOI) in ceramic replica foams
  In: Open Ceramics 7 (2021), Article No.: 100154
  ISSN: 2666-5395
  DOI: 10.1016/j.oceram.2021.100154
• Griseri M., Biggemann J., Ramos JP., Li G., Dams O., Popescu L., Vleugels J., Fey T., Lambrinou K.:
  Porous TaCx ISOL target materials from mould-casted Ta4AlC3
  In: Journal of the European Ceramic Society (2021)
  ISSN: 0955-2219
  DOI: 10.1016/j.jeurceramsoc.2021.02.022
• Rottensteiner-Brandl U., Bertram U., Lingens L., Köhn K., Distel L., Fey T., Körner C., Horch RE., Arkudas A.:
  Free Transplantation of a Tissue Engineered Bone Graft into an Irradiated, Critical-Size Femoral Defect in Rats
  In: Cells 10 (2021)
  ISSN: 2073-4409
  DOI: 10.3390/cells10092256
• Steiner D., Winkler S., Heltmann-Meyer S., Trossmann VT., Fey T., Scheibel T., Horch RE., Arkudas A.:
  Enhanced vascularization and de novo tissue formation in hydrogels made of engineered RGD-tagged spider silk proteins in the arteriovenous loop model
  In: Biofabrication 13 (2021)
  ISSN: 1758-5082
  DOI: 10.1088/1758-5090/ac0d9b

2020

• Biggemann J., Hoffmann P., Hristov I., Simon S., Müller P., Fey T.:
  Injection Molding of 3-3 Hydroxyapatite Composites
  In: Materials 13 (2020), Article No.: 1907
  ISSN: 1996-1944
  DOI: 10.3390/ma13081907
  URL: https://www.mdpi.com/1996-1944/13/8/1907
• Biggemann J., Müller P., Köllner D., Simon S., Hoffmann P., Heik P., Lee JH., Fey T.:
  Hierarchical Surface Texturing of Hydroxyapatite Ceramics: Influence on the Adhesive Bonding Strength of Polymeric Polycaprolactone
  In: Journal of Functional Biomaterials 11 (2020), Article No.: 73
  ISSN: 2079-4983
  DOI: 10.3390/jfb11040073
  URL: https://www.mdpi.com/2079-4983/11/4/73
• Eichhorn F., Kellermann S., Betke U., Fey T.:
  Phase evolution, filler-matrix interactions, and piezoelectric properties in lead zirconate titanate (PZT)-filled polymer-derived ceramics (PDCs)
  In: Materials 13 (2020), Article No.: 1520
  ISSN: 1996-1944
  DOI: 10.3390/ma13071520
• Winkler S., Mutschall H., Biggemann J., Fey T., Greil P., Körner C., Weisbach VG., Meyer-Lindenberg A., Arkudas A., Horch RE., Steiner D.:
  Human Umbilical Vein Endothelial Cell Support Bone Formation of Adipose-Derived Stem Cell-Loaded and 3D-Printed Osteogenic Matrices in the Arteriovenous Loop Model
  In: Tissue Engineering - Part A (2020)
  ISSN: 1937-335X
  DOI: 10.1089/ten.tea.2020.0087

2019

• Eichhorn F., Kakimoto Ki., Greil P., Fey T.:
  Influence of Porosity Orientation on Physical Properties in Porous PZT Ceramics
  In: Advanced Engineering Materials (2019), Article No.: 1900390
  ISSN: 1438-1656
  DOI: 10.1002/adem.201900390
• Elsayed H., Chmielarz A., Potoczek M., Fey T., Colombo P.:
  Direct ink writing of three dimensional Ti2AlC porous structures
  In: Additive Manufacturing 28 (2019), p. 365-372
  ISSN: 2214-7810
  DOI: 10.1016/j.addma.2019.05.018
• Fey T., Scheffler M., Travitzky N.:
  Celebrating the 65(th) Birthday of Professor Peter Greil
  In: Advanced Engineering Materials 21 (2019)
  ISSN: 1438-1656
  DOI: 10.1002/adem.201900484
• Gelse K., Biggemann J., Stumpf M., Halmheu M., Grüneboom A., Scholtysek C., Pachowsky M., Kleyer A., Hueber A., Krönke G., Fey T.:
  Modular lattice constructs for biological joint resurfacing
  In: Tissue Engineering: Parts A, B, and C (2019)
  ISSN: 1937-3368
  DOI: 10.1089/ten.TEA.2018.0231
• Obmann R., Schoerpf S., Gorsche C., Liska R., Fey T., Konegger T.:
  Porous polysilazane-derived ceramic structures generated through photopolymerization-assisted solidification templating
  In: Journal of the European Ceramic Society 39 (2019), p. 838-845
  ISSN: 0955-2219
  DOI: 10.1016/j.jeurceramsoc.2018.11.045
• Schelm K., Fey T., Dammler K., Betke U., Scheffler M.:
  Hierarchical-Porous Ceramic Foams by a Combination of Replica and Freeze Technique
  In: Advanced Engineering Materials (2019)
  ISSN: 1438-1656
  DOI: 10.1002/adem.201801362
• Steiner D., Lang G., Fischer L., Winkler S., Fey T., Greil P., Scheibel T., Horch RE., Arkudas A.:
  Intrinsic Vascularization of Recombinant eADF4(C16) Spider Silk Matrices in the Arteriovenous Loop Model
  In: Tissue Engineering: Parts A, B, and C (2019)
  ISSN: 1937-3368
  DOI: 10.1089/ten.tea.2018.0360
• Stumpf M., Köllner D., Biggemann J., Schüßler M., Greil P., Fey T.:
  Encapsulation of Reactive Ti2AlC and Nb2AlC Particles via a Boehmite Precipitation Route
  In: Advanced Engineering Materials 21 (2019), Article No.: 1900048
  ISSN: 1438-1656
  DOI: 10.1002/adem.201900048

2018

• Biggemann J., Diepold B., Pezoldt M., Stumpf M., Greil P., Fey T.:
  Automated 3D assembly of periodic alumina-epoxy composite structures
  In: Journal of the American Ceramic Society (2018)
  ISSN: 0002-7820
  DOI: 10.1111/jace.15586
• Biggemann J., Diepold B., Pezoldt M., Stumpf M., Greil P., Fey T.:
  Automated 3D assembly of periodic alumina‐epoxy composite structures
  In: Journal of the American Ceramic Society 101 (2018), p. 3864-3873
  ISSN: 1551-2916
  DOI: 10.1111/jace.15586
• Biggemann J., Pezoldt M., Stumpf M., Greil P., Fey T.:
  Modular ceramic scaffolds for individual implants
  In: Acta Biomaterialia 80 (2018), p. 390-400
  ISSN: 1742-7061
  DOI: 10.1016/j.actbio.2018.09.008
• Fey T., Stumpf M., Chmielarz A., Colombo P., Greil P., Potoczek M.:
  Microstructure, thermal conductivity and simulation of elastic modulus of MAX-phase (Ti2AlC) gel-cast foams
  In: Journal of the European Ceramic Society 38 (2018), p. 3424-3432
  ISSN: 0955-2219
  DOI: 10.1016/j.jeurceramsoc.2018.04.012
• Fey T., Stumpf M., Chmielarz AM., Colombo P., Greil P., Potoczek M.:
  Microstructure, thermal conductivity and simulation of elastic modulus of MAX-phase (Ti2AlC) gel-cast foams
  In: Journal of the European Ceramic Society 38 (2018), p. 3424-3432
  ISSN: 0955-2219
  DOI: 10.1016/j.jeurceramsoc.2018.04.012
• Menge G., Lorenz H., Fu Z., Eichhorn F., Schader F., Webber KG., Fey T., Greil P., Travitzky N.:
  Paper-Derived Ferroelectric Ceramics: A Feasibility Study
  In: Advanced Engineering Materials (2018)
  ISSN: 1438-1656
  DOI: 10.1002/adem.201800052
• Steiner D., Lingens L., Fischer L., Köhn K., Detsch R., Boccaccini AR., Fey T., Greil P., Weis C., Beier J., Horch RE., Arkudas A.:
  Encapsulation of Mesenchymal Stem Cells Improves Vascularization of Alginate-Based Scaffolds.
  In: Tissue Engineering: Parts A, B, and C 24 (2018), p. 1320-1331
  ISSN: 1937-3368
  DOI: 10.1089/ten.TEA.2017.0496
• Stumpf M., Biggemann J., Fey T., Kakimoto KI., Greil P.:
  Nb2AlC-Particle-Reinforced ZrO2-Matrix Composites
  In: Journal of Ceramic Science and Technology 9 (2018), p. 271-278
  ISSN: 2190-9385
  DOI: 10.4416/JCST2018-00013
• Stumpf M., Fey T., Kakimoto K., Greil P.:
  Nb2AlC-particle induced accelerated crack healing in ZrO2–matrix composites
  In: Ceramics International 44 (2018), p. 19352-19361
  ISSN: 0272-8842
  DOI: 10.1016/j.ceramint.2018.07.164
  URL: https://www.sciencedirect.com/science/article/pii/S0272884218319072
• Unterweger H., Dezsi L., Matuszak J., Janko C., Poettler M., Jordan J., Bäuerle T., Szebeni J., Fey T., Boccaccini AR., Alexiou C., Cicha I.:
  Dextran-coated superparamagnetic iron oxide nanoparticles for magnetic resonance imaging: Evaluation of size-dependent imaging properties, storage stability and safety
  In: International Journal of Nanomedicine 13 (2018), p. 1899-1915
  ISSN: 1176-9114
  DOI: 10.2147/IJN.S156528

2017

• Eichhorn F., Biggemann J., Kellermann S., Kawai A., Kato K., Kakimoto KI., Fey T.:
  Influence of Cell Size on Mechanical and Piezoelectric Properties of PZT and LNKN Ceramic Foams
  In: Advanced Engineering Materials (2017)
  ISSN: 1438-1656
  DOI: 10.1002/adem.201700420
• Eichhorn F., Stenzel A., Weisenseel B., Travitzky N., Kakimoto KI., Greil P., Fey T.:
  Porous piezoelectric ceramics with 3-3-connectivity fabricated by impregnation of cellulose paper structures
  In: Materials Letters 206 (2017), p. 158-161
  ISSN: 0167-577X
  DOI: 10.1016/j.matlet.2017.07.007
• Großberger S., Fey T., Lee G.:
  Freezing kinetics of vacuum-induced surface directional freezing in a glass vial
  In: Chemical Engineering Science 167 (2017), p. 154-160
  ISSN: 0009-2509
  DOI: 10.1016/j.ces.2017.03.066
• Hiemer S., Fey T., Kaschta J., Schubert DW.:
  A comparative study of mechanical properties of table tennis balls
  54th Nordic Polymer Days (Stockholm)
• Rottensteiner-Brandl U., Distel L., Stumpf M., Fey T., Köhn K., Bertram U., Lingens L., Greil P., Horch RE., Arkudas A.:
  Influence of different irradiation protocols on vascularization and bone formation parameters in rat femora.
  In: Tissue Engineering - Part C: Methods 23 (2017), p. 583-591
  ISSN: 1937-3392
  DOI: 10.1089/ten.TEC.2017.0170
• Weisenseel B., Harris J., Stumpf M., Wolf S., Fey T., Greil P.:
  Enhancement of the Carbothermal Reduction of Hafnium Oxide by Silicon
  In: Advanced Engineering Materials 19 (2017), p. 1600377
  ISSN: 1438-1656
  DOI: 10.1002/adem.201600377
• Zierath B., Greil P., Stumpf M., Fey T.:
  Enforcing of Mechanical Properties of Alumina Foams
  In: J. C. LaSalvia, R. Narayan, P. Colombo, M. Fukushima and A. Gyekenyesi (ed.): Advances in Ceramic Armor, Bioceramics, and Porous Materials, John Wiley & Sons, Inc., 2017, p. 149-162 (Ceramic Engineering and Science Proceedings, Vol.37)
  ISBN: 9781119321682
  DOI: 10.1002/9781119321682.ch16

2016

• Boccardi E., Philippart A., Melli V., Altomare L., De Nardo L., Novajra G., Vitale-Brovarone C., Fey T., Boccaccini AR.:
  Bioactivity and Mechanical Stability of 45S5 Bioactive Glass Scaffolds Based on Natural Marine Sponges
  In: Annals of Biomedical Engineering 44 (2016), p. 1881-1893
  ISSN: 0090-6964
  DOI: 10.1007/s10439-016-1595-5
• Kern A., Zierath B., Fey T., Etzold B.:
  Adsorption of Nickel Ions on Oxygen-Functionalized Carbons
  In: Chemical Engineering & Technology 39 (2016), p. 715-722
  ISSN: 0930-7516
  DOI: 10.1002/ceat.201500694
• Miguez Pacheco V., Büttner T., Macon ALB., Jones JR., Fey T., de Ligny D., Greil P., Chevalier J., Malchere A., Boccaccini AR.:
  Development and characterization of lithium-releasing silicate bioactive glasses and their scaffolds for bone repair
  In: Journal of Non-Crystalline Solids 432 (2016), p. 65-72
  ISSN: 0022-3093
  DOI: 10.1016/j.jnoncrysol.2015.03.027
• Tangermann-Gerk K., Barroso GS., Weisenseel B., Greil P., Fey T., Schmidt M., Motz G.:
  Laser pyrolysis of an organosilazane-based glass/ZrO2 composite coating system
  In: Materials & Design 109 (2016), p. 644-651
  ISSN: 0264-1275
  DOI: 10.1016/j.matdes.2016.07.102
• Weisenseel B., Greil P., Fey T.:
  Biomorphous Silicon Carbide as Novel Loop Heat Pipe Wicks
  In: Advanced Engineering Materials (2016)
  ISSN: 1438-1656
  DOI: 10.1002/adem.201600379

2015

• Bei GP., Pedimonte BJ., Pezoldt M., Ast J., Fey T., Göken M., Greil P.:
  Crack Healing in Ti2Al0.5Sn0.5C-Al2O3 Composites
  In: Journal of the American Ceramic Society 98 (2015), p. 1604-1610
  ISSN: 0002-7820
  DOI: 10.1111/jace.13496
• Qasim S., Delaine-Smith R., Rawlinson A., Fey T., Rehman I.:
  Freeze gelated porous membranes for periodontal tissue regeneration
  In: Acta Biomaterialia 23 (2015), p. 317-328
  ISSN: 1742-7061
  DOI: 10.1016/j.actbio.2015.05.001
• Weisenseel B., Zierath B., Fey T., Greil P.:
  Adjustment of the Optical Properties of Dispersion Derived Carbon Nanotube Coatings
  In: Advanced Engineering Materials (2015)
  ISSN: 1438-1656
  DOI: 10.1002/adem.201500343
• Zorzin JI., Maier E., Harre S., Fey T., Belli R., Lohbauer U., Petschelt A., Taschner M.:
  Bulk-fill resin composites: Polymerization properties and extended light curing
  In: Dental Materials 31 (2015), p. 293-301
  ISSN: 0109-5641
  DOI: 10.1016/j.dental.2014.12.010

2014

• Adam M., Kocanis S., Fey T., Wilhelm M., Grathwohl G.:
  Hierarchically ordered foams derived from polysiloxanes with catalytically active coatings
  In: Journal of the European Ceramic Society 34 (2014), p. 1715-1725
  ISSN: 0955-2219
  DOI: 10.1016/j.jeurceramsoc.2013.12.011
• Fey T., Zierath B., Kern A., Greil P., Etzold B.:
  An advanced method to manufacture hierarchically structured carbide-derived carbon monoliths
  In: Carbon 70 (2014), p. 30-37
  ISSN: 0008-6223
  DOI: 10.1016/j.carbon.2013.12.052
• Hoppe A., Jokic B., Janackovic D., Fey T., Greil P., Romeis S., Schmidt J., Peukert W., Lao J., Jallot E., Boccaccini AR.:
  Cobalt-Releasing 1393 Bioactive Glass-Derived Scaffolds for Bone Tissue Engineering Applications
  In: ACS Applied Materials and Interfaces 6 (2014), p. 2865-2877
  ISSN: 1944-8244
  DOI: 10.1021/am405354y
• Jakobsen BD., Hammerbacher R., Dudczig S., Fey T., Roosen A.:
  Manufacture of Rotationally Symmetric Multilayer Refractory Devices for Steel Casting Applications by Spiral Winding of Ceramic Green Tapes
  In: Journal of Ceramic Science and Technology 5 (2014), p. 137-144
  ISSN: 2190-9385
  DOI: 10.4416/JCST2013-00040
• Pedimonte B., Bei G., Pourjafar D., Fey T., Greil P.:
  Oxidative Crack Healing in Al2O3 Composites Loaded with Ti(2)AC (A = Al, Sn) Repair Fillers
  In: Journal of Ceramic Science and Technology 5 (2014), p. 63-67
  ISSN: 2190-9385
  DOI: 10.4416/JCST2013-00044
• Pedimonte B., Moest T., Luxbacher T., von Wilmowsky C., Fey T., Schlegel A., Greil P.:
  Morphological zeta-potential variation of nanoporous anodic alumina layers and cell adherence
  In: Acta Biomaterialia 10 (2014), p. 968-974
  ISSN: 1742-7061
  DOI: 10.1016/j.actbio.2013.09.023
• Travitzky N., Bonet A., Dermeik B., Fey T., Filbert-Demut I., Schlier L., Schlordt T., Greil P.:
  Additive Manufacturing of Ceramic-Based Materials
  In: Advanced Engineering Materials 16 (2014), p. 729-754
  ISSN: 1438-1656
  DOI: 10.1002/adem.201400097

2013

• Arkudas A., Balzer A., Bührer G., Arnold I., Hoppe A., Detsch R., Newby P., Fey T., Greil P., Horch RE., Boccaccini AR., Kneser U.:
  Evaluation of angiogenesis of bioactive glass in the arteriovenous loop model
  In: Tissue Engineering - Part C: Methods 19 (2013), p. 479-486
  ISSN: 1937-3384
  DOI: 10.1089/ten.tec.2012.0572
• Fey T., Goetz M., Greil P.:
  Photoelastic Imaging of Residual Stress Distribution in Epoxy Interface Layers of Ceramics with Periodic Building-Block Structure
  In: Advanced Engineering Materials 15 (2013), p. 1099-1104
  ISSN: 1438-1656
  DOI: 10.1002/adem.201300034

2012

• Ceron Nicolat B., Wolff F., Dakkouri AS., Fey T., Münstedt H., Greil P.:
  Graded Cellular Ceramics from Continuous Foam Extrusion
  In: Advanced Engineering Materials 14 (2012), p. 1097-1103
  ISSN: 1438-1656
  DOI: 10.1002/adem.201200039
• Wolff F., Ceron Nicolat B., Fey T., Greil P., Münstedt H.:
  Extrusion Foaming of a Preceramic Silicone Resin with a Variety of Profiles and Morphologies
  In: Advanced Engineering Materials 14 (2012), p. 1110-1115
  ISSN: 1438-1656
  DOI: 10.1002/adem.201100351

2011

• Schmirler M., Knorr T., Fey T., Lynen A., Greil P., Etzold B.:
  Fast production of monolithic carbide-derived carbons with secondary porosity produced by chlorination of carbides containing a free metal phase
  In: Carbon 49 (2011), p. 4359-4367
  ISSN: 0008-6223
  DOI: 10.1016/j.carbon.2011.06.013

2008

• de Sousa E, Rambo CR, Hotza D, de Oliveira APN, Fey T, Greil P:
  Microstructure and properties of LZSA glass-ceramic foams
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 476 (2008), p. 89-97
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2007.05.098
• Rambo CR., Andrade T., Fey T., Sieber H., Martinelli AE., Greil P.:
  Microcellular Al2O3 ceramics from wood for filter applications
  In: Journal of the American Ceramic Society 91 (2008), p. 852-859
  ISSN: 0002-7820
  DOI: 10.1111/j.1551-2916.2007.02223.x
• Travitzky N., Windsheimer H., Fey T., Greil P.:
  Preceramic Paper-Derived Ceramics
  In: Journal of the American Ceramic Society 91 (2008), p. 3477-3492
  ISSN: 0002-7820
  DOI: 10.1111/j.1551-2916.2008.02752.x

2007

• Haas D., Fey T., Greil P.:
  Biornorphous metal-ceramic-composites with high coefficient of friction
  In: Advanced Engineering Materials 9 (2007), p. 892-897
  ISSN: 1438-1656
  DOI: 10.1002/adem.200700137

2006

• Zampieri A, Kullmann S, Selvam T, Bauer J, Schwieger W, Sieber H, Fey T, Greil P:
  Bioinspired Rattan-derived SiSiC/zeolite monoliths: Preparation and characterisation
  In: Microporous and Mesoporous Materials 90 (2006), p. 162-174
  ISSN: 1387-1811
  DOI: 10.1016/j.micromeso.2005.10.049

2005

• Silveira C, Sousa E, Moraes E, Oliveira APN, Hotza D, Fey T, Greil P:
  CHARACTERISATION OF LZSA GLASS CERAMICS FILTERS OBTAINED BY THE REPLICATION METHOD
  In: Ceramic Engineering and Science Proceedings 26 (2005), p. 53-59
  ISSN: 0196-6219
• Muller L, Muller FA, Zeschky J, Fey T, Greil P:
  Fabrication of hydroxyapatite ceramics with interconnected macro porosity
  In: Key Engineering Materials 284-286 (2005), p. 277-280
  ISSN: 1013-9826
• Sousa E, Silveira CB, Fey T, Greil P, Hotza D, de Oliveira APN:
  LZSA glass ceramic foams prepared by replication process
  In: Advances in Applied Ceramics 104 (2005), p. 22-29
  ISSN: 1743-6753
  DOI: 10.1179/174367605225011043
• Fey T., Sieber H., Greil P.:
  Formation of highly-porous biomorphous SiC-ceramics derived from cellulose paper

2002

• Greil P, Vogli E, Fey T, Bezold A, Popovska N, Gerhard H, Sieber H:
  Effect of microstructure on the fracture behavior of biomorphous silicon carbide ceramics
  In: Journal of the European Ceramic Society 22 (2002), p. 2697-2707
  ISSN: 0955-2219